Bluedio T3 3RD Generation - Bluetooth Connectivity and Pairing; Entering Pairing Mode; Pairing Headphones with Your Device; Connecting to Two Mobile Phones

!!Iii Entering pairing mode
When the headphones are off (If not, turn off the headphones
first), press and hold the MF Button until you hear "Pairing"
or you see the blue light stays on (instead of blinking).
Note:
If this is the first time connecting the headphones to
your device via Bluetooth, please make sure the
headphones have entered pairing mode.
!!Iii Pairing
1. Move the headphones close to your mobile phone. The
closer, the better.
2. Make sure the headphones have entered pairing mode.
(See instruction "Entering pairing mode")
3. Go to your phone's Bluetooth settings, add
or search
devices. (Make sure the Bluetooth feature is turned on)
4. Select "T3" from the found Bluetooth devices. (If asked for a
password
or PIN code, enter "0000")
5. Once successfully paired and connected, you will hear
"Connected".
Note:
If pairing is not successful within 60 seconds, the blue
light blinks and the headphones are out
of pairing mode.
Please turn
off the headphones and try pairing again.
!!Iii Turning the headphones on
Press and hold the MF Button until you hear "Power on" or you
see the red and blue light comes on.
Note:
If the headphones have successfully paired to your
device, simply turn on the headphones to reestablish the
Bluetooth connection. No need to enter pairing mode.(See
instruction "Reconnecting")
!!Iii Turning the headphones off
Press and hold the MF Button until you hear "Power off" or
you see the red and blue light comes on.
!!Iii Connecting to 2 mobile phones:
1.Move the headphones close to 2 mobile phones. The
closer, the better.
2. Make sure the headphones have entered pairing mode.
(See instruction "Entering pairing mode")
3. Go to the Bluetooth settings on phone
1, turn on the
••• 3 •••
Bluetooth feature, add or search devices, select "T3".
4. Turn
off the Bluetooth feature on phone 1, and turn off the
headphones.
5. Make sure the headphones have entered pairing mode. (See
instruction "Entering pairing mode")
6. Go to the Bluetooth settings on phone 2, turn on the
Bluetooth feature, add
or search devices, select "T3".
7. Turn on the Bluetooth feature
of phone 1, and the
headphones will reconnect to phone 1 automatically.
(If
automatic reconnecting fails, please Unpair/Forget This
Device on phone 1. Turn
off the headphones and try pairing
again)
!!Iii Reconnecting
1. Move the headphones close to your mobile phone. The
closer, the better.
2. Simply turn on the headphones, no additional operation
needed. When you see the blue light blinks, the
headphones are in reconnecting mode.
3. Turn on the Bluetooth feature
of your phone, and the
headphones will reconnect to
your phone automatically.
Once successfully reconnecting, you will hear
"Connected".
Note:
If automatic reconnecting fails, please Un pair/Forget
This Device on
your phone. Turn off the headphones and
try pairing again.
!!Iii Disconnecting the headphones from your phone
Turn off the headphones or turn off the Bluetooth feature on
your phone.
!!Iii Note: "in Bluetooth mode" means the headphones
and your phone are connected via Bluetooth.
Using the headphones to talk (in Bluetooth mode)
!!Iii To answer a call
When you hear a ringtone, there is an incoming call. To
answer it: press the MF Button once.
• •• 4 •••