What does 'Remove Probe' mean on my BlueStar BSDF36 Ranges?
If your BlueStar Ranges displays 'Remove Probe', it indicates that the meat probe has been detected while the oven is in Broil or Clean modes. You should remove the meat probe.
What does 'Probe Not Detected' mean on my BlueStar BSDF36?
If your BlueStar Ranges displays 'Probe Not Detected', it means the meat probe is not detected. Ensure that you insert the meat probe properly.
How to fix BlueStar BSDF36 Ranges burner that won't ignite with no clicking sound?
If your BlueStar Ranges burner won't ignite and there's no clicking sound, it might be due to a lack of electrical power. First, ensure the range is plugged into a properly grounded three-prong electrical outlet. If it is, check the circuit breaker for the appliance and reset it if necessary.
Why does the burner flame float on my BlueStar Ranges?
If the burner flame floats on your BlueStar Ranges and you are using LP, the propane supply might be low. Refill the propane tank.
Why is the fan running behind the control panel of my BlueStar BSDF36 when the oven is off?
If the fan behind the control panel of your BlueStar Ranges is running when the oven is turned off, it's likely because the oven has not cooled to 200° F (93° C) or lower. Allow the oven to cool down completely.
Why is the oven light not working in my BlueStar BSDF36 Ranges?
If the oven light in your BlueStar Ranges is not on, it may be due to a lack of electrical power to the appliance. Check and reset the circuit breaker for the wall outlet used for the appliance. Another possibility is that the oven light bulb is burned out. Check and reset the circuit breaker for the wall outlet used for the appliance.
Why is the convection fan not turning in my BlueStar Ranges?
If the convection fan in your BlueStar Ranges does not turn on, first confirm that the oven door is shut, as the fan will not operate when the door is open. Another possible reason is no electrical power to the appliance. Check and reset the circuit breaker for the appliance.
What to do if BlueStar Ranges oven is on but not heating?
If the oven in your BlueStar Ranges is on but not heating, the issue could be a lack of electrical power to the appliance. Check and reset the circuit breaker for the appliance.
Why is my BlueStar Ranges burner not fully igniting?
If your BlueStar Ranges burner does not fully ignite, it could be due to a partial gas supply. Ensure that the gas supply is fully on. Another possible cause is clogged burner ports. Use a push pin or safety pin to carefully clear the ports.
How to fix a noisy convection fan in BlueStar Ranges?
If the convection fan in your BlueStar Ranges is making noise, it's possible that the mounting screws on the fan cover are loose. You can resolve this by tightening the screws.
General| Type | Freestanding |
|---|---|
| Burners | 6 |
| Convection | Yes |
| Finish | Stainless Steel |
| Color | Stainless Steel |
| Configuration | Range |
| Width | 36 inches |
To Next Page
