Why BlueStar BSDF36 burner won't ignite with clicking sound but no spark?
If your BlueStar Ranges burner won't ignite and there's a clicking sound but no spark, the issue might be that the gas is not turned on. Make sure to turn on the gas supply. Alternatively, the burner ports could be clogged. Clear them using a push pin or safety pin.
What to do if BlueStar BSDF36 Ranges burner won't ignite but there is a clicking sound and a spark?
If your BlueStar Ranges burner won't ignite but there is a clicking sound and a spark, it is likely that the gas supply is not turned on. Turn on the gas supply to resolve this issue.
Why does the clicking sound not stop after my BlueStar BSDF36 Ranges burner ignites?
If your BlueStar Ranges burner ignites, but the clicking sound doesn't stop, it could be due to several reasons. One possibility is that the burners are wet; in this case, let them dry thoroughly and try again. Another cause might be that the electric plug isn't in a grounded outlet. Ensure the appliance is plugged into a grounded three-prong electrical outlet and check the outlet polarity.
General| Type | Freestanding |
|---|---|
| Burners | 6 |
| Convection | Yes |
| Finish | Stainless Steel |
| Color | Stainless Steel |
| Configuration | Range |
| Width | 36 inches |
To Next Page
