LCD Instructions
Startup
Shutdown
Each icon represents a detachable battery. The AC180T can display up to
2 battery icons.
The AC180T is charging in Silent Charging Mode.
The AC180T is charging from a DC power source, such as solar panels,
lead-acid batteries, etc.
The AC180T connects to BLUETTI App via Bluetooth.
When it lights up, the fan is activated and working properly.
If it flashes, there may be a problem with the fan.
The AC180T is charging in Turbo Charging Mode.
The real-time AC charging power.
The real-time total AC output.
The real-time AC output voltage.
The real-time AC output frequency.
The AC180T is charging from the home grid.
The DC output is turned on.
The AC output is turned on.
The AC180T is operating in Power Lifting Mode.
The remaining time of charging or discharging.
: Charging : Discharging
The temperature inside the unit is too low.
The temperature inside the unit is too high.
The AC180T is drawing too much current, which can cause damage to the unit
or any connected devices.
The AC180T is overloaded.
There's an issue with the AC180T, which may require troubleshooting or repair.
The real-time DC output.
The SoC drops below 5%.
The remaining battery capacity.
If it flashes, the charge levels of the two batteries are different.
The real-time DC input.
The ECO Mode is activated to save power.
The bar increases during charging and decreases during discharging.
LCD lights up
LCD lights off
JUST POWER ON 15
To Next Page
Loading...
