Bluetti AC180T - Charging

7. Charging
AC180T supports four charging methods: AC, solar, car, and generator.
Attention:
• Double-check that all cables are firmly plugged in.
• Avoid getting the plug and socket wet to prevent any potential damage.
7.1 AC Charging
Plug the AC180T into a standard wall outlet and start charging. Once it's fully charged, the
AC180T automatically stops charging to prevent overcharging. For a fast charge, you can
enable Turbo Charging in the BLUETTI App, which allows for an 80% capacity in just 48
minutes at an ambient temperature of 25°C (77°F).
7.2 Solar Charging
Connect the solar panels (in series or parallel) to AC180T via the solar charging cable.
When receiving a continuous input of 500W, the AC180T will automatically stop charging
after 2 hours with 1 battery or 4 hours with 2 batteries. However, please be aware that the
charging time may vary based on weather conditions, sunlight intensity, panel orientation,
and other variables.
Note: Make sure your solar panel(s) meet the following requirements:
Voc: 12V-60V Current: 10A Max. Power: 500W Max.
JUST POWER ON16