9.4 Power Lifting Mode
The Power Lifting Mode is specifically designed to handle resistive loads up to 2,700W,
including electric blankets, kettles, hairdryers, and other heating devices. To enable or
disable it, access the Setting Mode, navigate with the DC Power Button until the starts
flashing on the screen, and press the AC Power Button.
Note: The Power Lifting Mode is not enabled by default and is only suitable for resistive
loads with a power rating between 1,800W-2,700W.
Although the AC180T can handle higher power demands, its actual operating power
remains at 1,800W.
9.5 AC Charging Mode
The AC180T supports 3 AC charging modes - Standard, Turbo, and Silent to fit your specific
needs. In the Setting Mode, use the DC power button to navigate until the or icon
starts flashing on the screen. Then, press the AC power button to choose the charging
modes.
9.6 Bluetooth On / Off
To connect the AC180T to the BLUETTI App, turn on the Bluetooth first. In the Setting
Mode, press the DC Power button to navigate through the setting items. When the
icon flashes on the screen, press the AC Power Button to turn Bluetooth on / off.
9.7 Grid Self-adaption Mode
If you're charging the AC180T using a generator or unstable grid voltage, and the total
power demand of your connected devices exceeds the AC180T's input power, it is
recommended that you enable the Grid Self-adaption Mode through the BLUETTI App to
ensure a stable, safe charging experience for both the AC180T and your devices.
Mode
Standard
Turbo
Silent
Recharging Time
2 hours
1.5 hours
0-80% in 48 mins
4 hours
Recharging Power
w/ 1 pack
450W
850W
360W Max.
w/2 packs
900W
1440W
720W Max.
Note
Reduces battery wear and
tear for long battery life.
Comes in handy when
recharging time is a priority.
Offers a quiet, low-power operation.
Icon
None
JUST POWER ON20
To Next Page
Loading...
