Bluetti AC180T - Page 26

JUST POWER ON26
Discharging temperature
too low
Grid overvoltage
Grid undervoltage
Grid overfrequency
Grid underfrequency
/
E088
E113
E114
E115
E116
Others
flashes
flashes
flashes
flashes
/
Make sure the unit is placed in an ambient
temperature of -20°C to 40°C (-4°F to 104°F).
Check if the grid voltage is too high.
Change the input source if necessary.
Check if the grid voltage is too low.
Change the input source if necessary.
Check if the grid frequency is too high.
Contact your local power provider if necessary.
Check if the grid frequency is too low.
Contact your local power provider if necessary.
Please contact BLUETTI support for assistance.