LCD Instructions
Startup
Shutdown
When it lights up, the fan is activated and working properly.
If it flashes, there may be a problem with the fan.
The AC2A is charging from solar panels.
The AC2A connects to BLUETTI App via Bluetooth.
The remaining battery capacity.
The AC2A is operating in Power Lifting Mode.
The AC2A is charging in Turbo Charging Mode.
The ECO Mode is enabled to save power.
The SoC drops below 5%.
The real-time total output.
The real-time AC output frequency.
The AC2A is charging from the home grid.
The DC output is turned on.
The AC output is turned on.
The remaining time of charging or discharging.
: Charging : Discharging
The temperature inside the unit is higher than 70°C (158°F).
The AC2A is drawing too much current, which can cause damage to the unit
or any connected devices.
The AC2A is overloaded.
There's an issue with the AC2A, which may require troubleshooting or repair.
The bar increases during charging and decreases during discharging.
The total input power.
LCD lights up
LCD lights off
JUST POWER ON14
To Next Page
Loading...
