7.3 Car Charging
Connect AC2A to the vehicle's 12V cigarette lighter port via the car charging cable. The
AC2A can charge at a maximum of 96W, and it'll automatically stop charging once it's fully
charged.
Note: Make sure your vehicle meets the following conditions for charging:
• The vehicle is capable of supplying power.
• The vehicle's engine is running during the charging process.
Note: Make sure your generator delivers the AC output with charging voltage, frequency,
and Grid Self-adaption Mode voltage that meet AC2A's specifications.
If the total power demand of your connected devices exceeds the generator's output
capacity, please turn on the Grid Self-adaption Mode to ensure a seamless charging
experience.
7.4 Generator Charging
Connect the AC2A to a generator via the AC charging cable. The AC2A will also automatically
stop charging when it's fully charged, typically within 1.4 hours if the generator output is
stable.
Attention:
The AC2A has a low-voltage disconnect function designed to protect your vehicle's
battery during charging. If the input voltage drops below 10.5V, the unit will automat-
ically stop charging to prevent over-discharging and potential damage to the
battery.
JUST POWER ON16
To Next Page
Loading...
