What to do if Bluetti EB150 Portable Generator has under-temperature protection when charging the battery?
If your Bluetti Portable Generator shows under-temperature protection when charging the battery, wait for a while for it to heat up and then restart the machine.
What to do if my Bluetti Portable Generator shows over-load protection of inverter?
To resolve an over-load protection of the inverter on your Bluetti Portable Generator, verify if the output port is overloaded. Then, turn off and on the AC output to restore normal operation.
How to fix battery protection on Bluetti EB150 Portable Generator?
If your Bluetti Portable Generator is experiencing battery protection, disconnect the solar charging cable and restart the machine.
What to do for battery failure on Bluetti EB150?
If your Bluetti Portable Generator indicates a battery failure, restart the machine and charge it.
What to do if the temperature of the heat sink is not detected in Bluetti EB150?
If the temperature of the heat sink is not detected in your Bluetti Portable Generator, insert the NTC and restart the machine.
What to do if Bluetti EB150 Portable Generator shows under-temperature protection when charging the battery?
If your Bluetti Portable Generator shows under-temperature protection when charging the battery, wait for a while for it to heat up and then restart the machine.
How to fix under-voltage protection for the 1st cell on Bluetti Portable Generator?
If your Bluetti Portable Generator displays an under-voltage protection error for the 1st cell, charge the product promptly and restart it once fully charged.
How to resolve under-voltage protection for the 2nd cell on Bluetti Portable Generator?
If your Bluetti Portable Generator displays an under-voltage protection error for the 2nd cell, charge the product promptly and restart it once fully charged.
How to fix busbar fault of inverter due to under-voltage on Bluetti EB150?
If your Bluetti Portable Generator experiences a busbar fault of inverter due to under-voltage, turn the machine off and on.
How to fix over-voltage protection (PV input) on Bluetti EB150 Portable Generator?
If your Bluetti Portable Generator displays an over-voltage protection error related to the PV input, disconnect the solar charging cable and then restart the machine.
List of safety warnings and precautions for product use and handling.
Instructions for turning the product on/off and managing AC/DC output.
Steps to activate and use the photovoltaic (PV) charging function.
Procedure for charging the product using solar power.
List of error codes, their problems, and corresponding solutions for troubleshooting.
Additional error codes and solutions for troubleshooting the product.
General| Brand | Bluetti |
|---|---|
| Model | EB150 |
| Category | Portable Generator |
| Language | English |
To Next Page
