In Split Phase Power System, it is recommended that you choose our matching AC input
cable. The AC input ports of the two machines are connected to L1,N,PE and L2,N,PE.
Make sure that the phase of the two machines is correct.
This AC Input Cable(Optional Purchase) is designed to match Split Phase System.
One end of the cable is connected to NEMA L14-30 socket, and the other end is connected
to AC input interface of both two units through aviation plug. It must be ensured that the
phase of the two machines is correct.
The current capacity of AC input plug shall be ≥30A.
- 06 -
CONNECTION 2 (Power Mode)
L1 N PE
PE
G(PE)
L2
W(N)
L1
X(L1)
N
Y(L2)
L2 N PE
AC Input
Cable(L14-30)
To Next Page
Loading...