EasyManua.ls Logo

Bluetti X30 - Storage and Usage

Bluetti X30
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.2. Storage and usage
When not using the unit for over 3 months, charge it to 40% to 60% SoC to keep it in
optimal condition.
Store the unit in a cool and dry place. The ideal temperature range is 10
0
C to 30
0
C. The unit
can be safely charged and discharged at temperatures of -20
0
C to 40
0
C. However, it’s NOT
recommended to store the unit in harsh temperatures for extended periods of time.
Fully cycle the unit every 3 months to maintain the battery’s health.
Clean the unit with a soft dry cloth.
Before storing the unit, power it off and remove all electrical connections from it.
If the SoC drops to 0 (during operation or upon startup), take the following
actions to safely restart the unit:
1)Shut down immediately.
2)Charging within 48 hours.
3)Battery should be kept at an ambient temperature of 5
0
C to 35
0
C for 24 hours before
charging.
BLUETTI shall not be liable for any equipment damage caused by the violation of above
instructions.
The transportation, wiring and maintenance shall comply with all applicable laws,
regulations and standards.
User-provided materials and tools required shall meet the requirements specified in
applicable laws, regulations and relevant standards.
In case of fire, EVACUATE the building or affected area immediately, activate the closest
FIRE ALARM system and CALL 9-1-1 or your local emergency phone number.
Use genuine cables and accessories provided by BLUETTI.
Keep the unit away from heat sources or high temperatures, and do not expose it to
direct sunlight.
Do not store the unit with flammable liquids, gases, or explosive materials.
Make sure the area where you are using the unit is well ventilated and spacious.
Do not block or cover the vents of the unit as this may cause irreversible damage to it.
Use the unit for its intended purpose and avoid stacking objects on top of it during
storage or use.
Do not move the unit during operation as the vibrations and shocks associated with
movement may cause damage to the internal hardware.
In case of malfunction, turn off the unit immediately and contact BLUETTI support or
your local BLUETTI dealers if this manual cannot adequately explain the malfunction to you.
Do not place the unit on an unstable or inclined surface.
Do not insert foreign objects into any port and vent of the unit.
Keep away from children and pets.
Legal and Regulatory Requirements
JUST POWER ON 07

Related product manuals