BLUM BLUMOTION

Technical specifications subject to change without notice.
LIT.HNG6200.10.10 © 2010 Printed in USA
Euro hinge attachment and adjustment
Depth adjustment
Rotate the rear spiral tech cam screw to adjust the door
position (
+
3/- 2 mm).
For CLIP hinges, loosen the rear
screws on all hinges, adjust and retighten.
Side adjustment
Rotate the front screw to increase or decrease the door
overlay (
+
/- 2 mm).
800-438-6788
www.blum.com
Door removal
Release the lever under the
hinge arm to remove.
Door installation
To install, place the hinge
on the mounting plate
and push the back
of the hinge arm down
with finger pressure.
The “click” sound
confirms a secure
attachment.
CLIP top BLUMOTION deactivation
For small or light doors, the BLUMOTION can
be deactivated on one of the hinges. Door must
be closed once for the deactivation to be
complete. To reactivate, move switch back to
the original position.

BLUM BLUMOTION Specifications

General

Product Type	Soft Close Mechanism
Installation	Integrated
Material	Plastic
Compatibility	Blum Hinges, Blum Drawer Runners, Blum Lift Systems
Color	White

Summary

Euro hinge attachment and adjustment

Door installation

To install, place the hinge on the mounting plate and push the back of the hinge arm down.

Door removal

Release the lever under the hinge arm to remove the hinge.

CLIP top BLUMOTION deactivation

Deactivate BLUMOTION on one hinge for small/light doors. Door must be closed.

Side adjustment

Rotate the front screw to adjust door overlay (+/- 2 mm).

Depth adjustment

Rotate rear spiral tech cam screw to adjust door position (+ 3/- 2 mm).

CLIP mounting plate adjustments

Height adjustment

Adjust door position using cam screws on the mounting plate.

Cam wing mounting plate

Rotate cam screw on mounting plate to adjust door position (+/- 2 mm).

One-piece wing plate

Loosen/tighten screws on mounting plate to adjust door position (+/- 3 mm).

Cam in-line mounting plate

Rotate cam screw on mounting plate to adjust door position (+/- 2 mm).

Face frame cam adapter plate

Rotate cam screw on mounting plate to adjust door position (+/- 2 mm).

Face frame adapter plate

Loosen/tighten screws on mounting plate to adjust door position (+/- 2 mm).