Maintenance
RC66 | 08-2021
14
Blum-Novotest GmbH
5. Maintenance
NOTICE
Damage to the measurement components due to contact with corrosive liquids.
Never use coolant containing solvents (acetone, alcohols, benzines, etc.).
Only use coolant with a pH value in the range of 4.5…9.5.
Never use cleaning agents containing acetone.
Always exercise caution when using cleaning agents containing solvents (alcohols, benzines, etc.) or a high acidic/
alkaline pH value – avoid long periods of exposure.
Never use abrasive cleaning agents (cleanser, scouring powder, etc.).
Clean the receiver regularly.
Remove chips regularly.
To Next Page
Loading...
