Introduction
RC66 | 08-2021
4
Blum-Novotest GmbH
1. Introduction
Please read and observe these instructions and the other applicable documents!
1.1 Legend – Warnings, marks, symbols
WARNING!
This information indicates a dangerous situation that, if not avoided, may result in death or serious injury.
... and shows you how you can avoid it.
CAUTION!
This information indicates a dangerous situation that, if not avoided, may result in mild to medium injury.
... and shows you how you can avoid it.
NOTICE
This information warns about an immediate threat of property damage.
... and shows you how you can avoid it.
1.2 Abbreviations and technical terms
The check mark indicates the required preconditions.
The white triangle prompts you to carry out an action.
The arrow indicates the consequences of your action.
(1) … The number in brackets refers to a respective item in an illustration.
Here you will find additional instructions and tips.
*; x This character in a file name or similar acts as a place holder for the version level, numbering, etc.
LED is lit. Green Red Yellow Blue Violet White
LED flashes. Turquoise Red-green-blue alternating
LED switched off.
BG BLUM measuring device – bore gauge. (BoreGauge)
DIGILOG BLUM technology – combination of analogue value
determination and digital processing.
MG BLUM multi-purpose measuring device (pressure,
temperature, position).
(MultipurposeGauge)
Probe General designation of any BLUM measuring de-
vice.
RG Measurement of surface roughness. (RoughnessGauge)
To Next Page
Loading...
Need help?
General
