BLUM TC64-10 - User Manual

TC60 | TC61 | TC62 | TC63-10 | TC63-30 | TC64-10
Touch probe TC Series – A3
Workpiece Measurement
Radio Transmission
shark360 Technology
Wear-free Measuring Mechanism
Single- & Mass Production
Axes Compensation
Operating instructions English
Type P03.6000-010 | P03.6100-020 |
P03.6200-010 | P03.6300-010 |
P03.6300-030 | P03.6400-010

BLUM TC64-10 Specifications

General

Brand	BLUM
Model	TC64-10
Category	Measuring Instruments
Language	English

Summary

Safety Rules and Precautions

System Overview and Components

Compatible Tool Holders

Technical Specifications

Provides key technical specifications like approach direction, forces, and speed.

Mounting and Commissioning Procedures

Battery Installation and Replacement Guide

Guidance on recommended battery types and procedures for insertion/replacement.

Tool Holder Mounting Instructions

Step-by-step instructions for mounting the touch probe into a tool holder.

Stylus Attachment and Calibration

Instructions on how to attach and calibrate the stylus to the probe.

Programming Probe Basic Settings

Steps for entering programming mode and changing basic settings using a magnetic pin.

Maintenance and Care

Troubleshooting Common Errors

Troubleshooting: Undefined LED Status

Identifies issues when LED status is undefined or flashes unsteadily.

Troubleshooting: Red LED Status Issues

Troubleshooting: Post-Battery Change Errors

Troubleshooting: Probe Activation Failures