To Next PageTo Next Page
Need help?Do you have a question about the BLUM TC60 and is the answer not in the manual?
General| Brand | BLUM |
|---|---|
| Model | TC60 |
| Category | Measuring Instruments |
| Language | English |
Important advice for handling the probe, its maintenance, and operation.
Defines symbols and abbreviations used in the manual.
Detailed description of the probe's components with numbered parts.
Explains the meaning of different LED colors and patterns for status indication.
Lists available tool holder types, dimensions, and order numbers for different probe series.
Detailed technical specifications for various TC probe models in a comparative table.
Illustrates complete system setups involving probes, receivers, and interfaces.
Detailed instructions on recommended battery types, capacity, and replacement procedures.
Step-by-step guide on mounting the probe into the tool holder, including concentricity adjustment.
Instructions for mounting the TC76-T probe, including torque specifications.
Step-by-step guide on mounting the stylus onto the probe, with cautions for specific models.
Details on the area of operation and maximum overtravel for cranked styli.
Instructions on how to initiate and view the probe's basic adjustment settings via LED signals.
Guide to programming probe settings like transmission mode, switch-on time, and probe type using a magnetic pin.
Instructions on how to mark multiple radio probes for identification and protection.
Reference to installation instructions for probe pairing with the receiver.
Information on switching on the probe via M-functions and related installation instructions.
Guidelines for safely cleaning the transparent ring using mild detergents and avoiding harsh chemicals.
Detailed procedure for exchanging external bellows on specific TC probe models, with cautions.
Explains icons used in the troubleshooting section for error messages and remedies.
Describes the cause and solution for the 'LED Status undefined' error.
Describes the cause and solution for the 'LED Status red' error, typically battery related.
Addresses issues with LED status after battery replacement and provides pressure compensation steps.
Lists potential reasons for probe activation failure and their respective solutions.
Lists order numbers for BTH 50 and BTH 25 tool holders.
Provides order numbers for various TC probe models.
Lists spare and wear parts such as bellows and batteries with their order numbers.
Lists order numbers for ceramic styli for TC60/61 probes, by length and diameter.
Lists order numbers for carbide styli for TC60/61 probes, by length and diameter.
Lists order numbers for ceramic styli for TC62/63/64-10 probes, by length and diameter.
Lists order numbers for carbide styli for TC62/63/64-10 probes, by length and diameter.
Provides order numbers for adapters and styli used with TC63/64 probes.
Guidelines for returning probes for repair, including packing and documentation requirements.
Lists radio approval details and regulations for Europe (CE).
Lists radio approval designation number for Japan.
Lists FCC ID and compliance statements for the USA.
Lists IC number and RF exposure compliance for Canada.
Lists the component names and their purpose for the EC Declaration of Incorporation.
Specifies safety requirements according to EC Machine Regulations and lists applied standards.
Provides contact details for the authorized representative for technical information.
Fields for entering company name, department, contact person, and contact information.
Fields for entering probe type, serial number, machine type, and manufacturer.
Field for providing a detailed description of the defect for service.
Main contact information for Blum-Novotest GmbH in Gruenkraut, Germany.
Contact numbers for sales, laser control, and measurement probe support.
Contact details for Blum-Novotest Srl in Como, Italy.
Contact details for Blum-Novotest Ltd. in Birmingham, England.
Contact details for KK Blum Laser Measuring Technology in Nagoya, Japan.
