BLUM TC51 User Manual

1
Touchprobe
Operatinginstructions English
Type TC50|TC51|TC52
TC53‐10|TC53‐30|TC54‐10
WorkpieceMeasurement
InfraredTransmission
shark360Technology
Wear‐FreeMeasuringSys‐
tem
Single&MassProduction
AxesCompensation

BLUM TC51 Specifications

General

Brand	BLUM
Model	TC51
Category	Measuring Instruments
Language	English

Summary

Introduction

Keys

Explains symbols, warnings, and abbreviations used in the manual.

Safety

CAUTION!

Warns about potential injuries from operating errors and handling.

NOTICE

Warns about potential damage from short circuits and aggressive coolants.

Mounting and Commissioning

Insert / Change Battery

Details battery types and replacement for TC50, TC51, TC53-30 and TC52, TC53-10, TC54-10.

Mounting of the Tool Holder

Explains the procedure for mounting the tool holder, including warnings.

Mounting of the TC76-T

Mounting / Changing of the Stylus

Provides instructions and warnings for mounting or changing the stylus.

Programming of Basic Adjustments

Notes Concerning Measuring Sequence

Measuring Error is Possible

Maintenance

Exchange of the External Bellows

Troubleshooting

LED Status Red

Describes troubleshooting steps for a red LED status.

LED Status Undefined

Describes troubleshooting steps for an undefined LED status.

LED Status After Battery Change

Guides on troubleshooting LED status after battery replacement.

LED Status Flashes Green-Blue/Green-Orange

Troubleshooting for specific LED flash patterns and probe response.

Shipping Instructions / Storage

NOTICE