BLUM TC60 - System Coding and Marking; Probe Pairing Procedure; Probe Activation Methods

Mounting and commissioning
28  by Blum-Novotest 2012
3.8 System coding
In case several radio probes are used in the machine, they can be marked.
Please always use the transparent label to protect!
Fig. 3.9
3.9 Probe pairing
 Installation instructions IF59-A2 (P03.5900-000.011)
3.10 Switch-on probe (via radio receiver)
Switch-on probe e.g. via M-functions
 Installation instructions RC66 (P03.6600-000.011)
 Installation instructions IF59-A2 (P03.5900-000.011)