BLUM TC64-10 - Page 27

Mounting and commissioning
 by Blum-Novotest 2012 27
1)
In standby mode the probe is ready for re-activation at any time.
2)
If the probe is outside of the receiving range of the radio receiver the probe changes into
Eco mode. If the probe is inside of the receiving range of the radio receiver it is ready for
re-activation at any time.

Not valid resp. reserved combinations are not stored.

Please check adjustments after programming (chap.3.6) and list them in the system
certificate.
Please adapt color code on the probe (see chap.3.8)