Water Tank Assembly
Cleaning the mopping cloth
1. Remove: When mopping is completed, remove the water tank assembly and remove the water
permeable mopping cloth.
2. Maintenance: Rinse and dry the mopping cloth.
3. Remove: After mopping the oor, remove the water tank assembly and the water permeable
cloth and pour o the remaining water in the water reservoir.
Side Brushes
Cleaning the Side Brushes
Pull out the side brush and wipe it with a clean cloth.
Other Assembly
Clean the universal wheel to reduce the amount of entangled hair.
Clear the sensor to maintain its sensitivity.
Use a dry cloth to clean the charging poles on the bottom of the main unit or the charging dock.
Step 1Step 3
Step 2
Maintenance: Rinse the reservoir and allow it to dry.
14
EN
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 142021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 14 23-08-2021 10:0223-08-2021 10:02
To Next Page
Loading...