Blyss A018I-12C - Plug Replacement and Wiring; Mains Lead Wire Colour Code

10
Plug replacement
ThisapplianceissuppliedwithaBS13633pinplugttedwitha
10 Amp fuse. Should the fuse require replacement, it must be
replaced with a fuse rated at 10 Amp and approved to BS1362.
In the event the mains plug has to be removed/replaced for any
reason, please note:
IMPORTANT: THE WIRES IN THE MAINS LEAD
ARE COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE
Blue – Neutral
Brown – Live
Green/Yellow-Earth
As the colours of the wires in
the mains lead of this appliance
may not correspond with the
coloured markings identifying
the terminals in your plug, proceed as follows.
• The blue wire must be connected to the terminal marked with an
N or coloured black.
• The brown wire must be connected to the terminal marked with
an L or coloured red.
• The green/yellow wire must be connected to the earthing terminal
which is marked with an E or with the earth symbol.
WARNING NEVER CONNECT LIVE OR NEUTRAL
WIRES TO THE EARTH TERMINAL OF THE PLUG.
Note:Ifamouldedplugisttedandhastoberemovedtake
great care in disposing of the plug and severed cable. It must be
destroyed to prevent from engaging into a socket.
Green / Yellow - Earth
BROWN Live
BLUE Neutral
Cord Clamp
FUSE 10 Amps
5063022060242_MNL_IN_V04.indd 105063022060242_MNL_IN_V04.indd 10 12-12-2022 16:08:0512-12-2022 16:08:05