BM&M Screening Solutions Toll-free 1-800-663-0323
BM&M START-UP CHECK LIST
1. Is there 4” of horizontal clearance all around the screen?
2. Have the hangers been checked for equal loading?
3. Have the U-joints been greased?
4. Are the hanger safety bolts secured?
5. Is the motor voltage correct?
6. Is the motor speed correct?
7. Does the power supply cable have enough freedom of movement?
8. Is the belt alignment okay and tension correct?
9. Is the drive guard in place?
10. Have all bolts been torqued correctly?
11. Are all protecting handrails in place?
12. Have all tools, scaffolding and lifting tackle been removed?
13. Is the time-delay restart circuitry in place or is the operator aware of the restarting
procedure?
To Next Page
Loading...