BMC E-20A-H-O User Manual

37 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

User Manual

RESmart GII Auto CPAP System

E-20A-H-O / E-20AJ-H-O

0123

Table of Contents

Questions and Answers:

A
Anthony WolfSep 9, 2025
Why does my BMC E-20A-H-O produce very low pressure?
- M
  Melissa CunninghamSep 10, 2025
  If the BMC device produces very low pressures, it could be due to a blocked air inlet. Try replacing the air filter and cleaning the inlet, ensuring it's unblocked. It's also possible the treatment pressure was accidentally changed, so contact your physician. If the Ramp feature is enabled, the pressure will gradually increase, which is normal; if needed, disable the Ramp feature or shorten the ramp time.
D
Denise HarveySep 12, 2025
How to adapt to BMC Humidifier pressure?
- S
  Scott BishopSep 12, 2025
  If you feel discomfort due to an inability to adapt to the treatment pressure with the BMC Humidifier, remember that it can take up to four weeks to adapt to pressurized air. Try to relax and breathe through your nose. If the problem persists, contact your physician.
K
Kevin RamirezSep 14, 2025
What to do if BMC Humidifier screen is not working?
- B
  Brian LynchSep 14, 2025
  If, after turning on your BMC device, the screen displays intermittently or not at all, the operating system may need to be readjusted or restarted. Unplug the power cord, wait 20 seconds, and then plug it back in.

BMC E-20A-H-O Specifications

General

Brand	BMC
Model	E-20A-H-O
Category	Humidifier
Language	English

Summary

1. Symbols

1.2 Device Symbols

Explains the meaning of various symbols used on the device and in the manual.

3. Intended Use

4. Contraindications

5. Specifications

6. Available Therapies

10. System Features

11. First Time Setup

11.1 Placing the Device

Instructions on how to position the device correctly on a flat surface.

11.2 Installing the Air Filter and Filter Cap

Steps for installing the air filter and filter cap onto the device.

11.3 Connecting to Power

Guide on how to connect the device to a power source using the adapter and cord.

11.4 Assembling the Tube and Mask

Instructions for connecting the breathing tube and mask to the device.

11.5 Using Oxygen with the Device

Guidance on safely using supplemental oxygen with the CPAP system.

11.6 Inserting the SD Card

Instructions for inserting and verifying the SD card in the device.

11.7 Using the SpO2 Kit

Details on how to connect and use the SpO2 kit for monitoring.

11.7.1 Connecting the SpO2 Kit to the Main Device

11.9 Starting Treatment

12. Routine Use

12.1 Connecting the Tube

12.3 Turning on the Airflow

12.5 Using the Ramp Button

12.6 Turning the Device Off

13. Navigating the Patient Menu

13.1 Steps to Navigating the Patient Menu

13.2 Options of the Patient Menu and Corresponding Descriptions

14. Alert

15. Cleaning and Disinfection

15.1 Cleaning the Mask and Headgear

15.3 Cleaning the Water Chamber of the Humidifier

15.5 Cleaning the Tube

15.6 Replacing the Air Filter

15.7 Disinfection

16. Traveling with the Device

21. Troubleshooting

21.1 Common Problems in Patients and Corresponding Solutions

Troubleshooting common issues experienced by patients during therapy.

21.2 Common Problems in the Device and Corresponding Solutions

Troubleshooting common operational issues with the CPAP device itself.

Related product manuals

Preview: BMC G3 Series