BMC E-20A-H-O User Manual

E-20A-H-O / E-20AJ-H-O User Manual V1.3
6 / 34
7. Glossary
Apnea
A condition marked by the cessation of spontaneous breathing.
Auto-CPAP
Adjust CPAP pressure automatically to improve patient comfort based on monitoring of
apnea and snoring events.
Auto Off
When this feature is enabled, the device automatically discontinues therapy whenever the
mask is removed.
Auto On
With this feature, the device automatically initiates therapy when you breathe into the mask.
This feature is always enabled.
CPAP
Continuous Positive Airway Pressure.
iCode
A feature that is intended to give access to compliance and therapy management information.
The ―iCode‖ consists of six separate codes displayed in the Patient Menu. iCode I displays
sequences of characters, and iCode II displays two-dimensional codes .
LPM
Liters Per Minute.
OSA
Obstructive Sleep Apnea.
Patient Menu
The display mode in which you can change patient-adjustable device settings, such as the
starting pressure for the Ramp feature.
Ramp
A feature that may increase patient comfort when therapy is started. It can reduce pressure
and then gradually increase the pressure to the prescription setting so the patient can fall
asleep more comfortably.
Reslex
A therapy feature that is enabled by your home care provider to provide pressure relief
during exhalation.
Standby State
The state of the device when power is applied but the airflow is turned off.

BMC E-20A-H-O Specifications

General

Brand	BMC
Model	E-20A-H-O
Category	Humidifier
Language	English