How to fix a BMC F2 Respiratory Product mask that won't seal properly or is uncomfortable?
If your BMC Respiratory Product mask doesn't seal properly or feels uncomfortable, it might be fitted incorrectly. Carefully follow the fitting instructions, ensuring that the headgear isn't too tight. If the issue persists, the mask size could be wrong, and it's best to consult your clinician.
What to do if my BMC F2 Respiratory Product mask leaks around the face?
If your BMC Respiratory Product mask leaks around the face, the cushion might be misplaced on the cushion frame. Check the insertion of the cushion and reinsert it correctly, following the reassembly instructions.
Why is my BMC F2 Respiratory Product mask too noisy?
If your BMC Respiratory Product mask is too noisy, it could be due to a wrong mask size, in which case you should consult your clinician. Alternatively, the vents might be blocked or partially blocked. Try cleaning the vents according to the cleaning instructions.
Channels airflow non-invasively to a patient from a positive airway pressure device.
Crucial safety precautions, including vent clearance, oxygen use, patient suitability, and potential adverse reactions.
Step-by-step guide for daily cleaning of mask components using mild soap and water.
Instructions for weekly hand washing of the headgear and all mask components with soap and water.
General| Brand | BMC |
|---|---|
| Model | F2 |
| Category | Respiratory Product |
| Language | English |
To Next Page
