BMC F2 - Disassembling the Mask

F2 Full Face Mask User Manual V2.1
7 / 14
English
Disassembling the Mask
Notes:
1. The elbow assembly cannot be dissembled from the frame
assembly.
2. The elbow assembly cannot be disintegrated.
3. The valve cannot be dissembled, or damage may be incurred
and the re-installation will become more difficult.
1
2
3
Undo and remove the
upper-half headgear
straps out of the hole
on the mask frame.
Remove the cushion
from the installation
groove on the mask
frame.
Remove the forehead
pad from the installation
groove on the mask
frame.