Need help?Do you have a question about the BMG Labtech spectrostar nano and is the answer not in the manual?
General| Type | Microplate reader |
|---|---|
| Detection Method | Absorbance, Fluorescence, Luminescence |
| Wavelength Range | 220 - 1000 nm |
| Absorbance Range | 0 - 4 OD |
| Software | MARS Data Analysis Software |
| Cuvette Reading | Yes |
| Shaking | Yes |
| Dispenser | Optional |
| Plate Formats | 6-384 well microplates |
| Fluorescence Excitation | Yes |
| Fluorescence Emission | Yes |
| Detection Technology | Monochromator |
| Sample Volume | 2 μL - 200 μL |
Explains the meaning of warning symbols used in the manual.
Provides general safety information for instrument installation and use.
Lists environmental conditions and standards for safe operation.
Details electrical safety requirements and precautions.
Outlines safety precautions for handling chemicals and biological samples.
Provides step-by-step instructions for cleaning and disinfecting the instrument.
Information on proper disposal and recycling of the instrument.
Guidelines for disposing of transport packing materials.
Explains compliance with the WEEE directive.
Describes the front panel layout and control features.
Information about the microplate carrier and supported formats.
Details the cuvette port and its compatibility.
Explains the functions of each button on the keypad control.
Describes the connectors and vents on the back of the instrument.
Instructions for securing and releasing the transport lock.
Steps for installing the necessary software for the instrument.
Guide on connecting power supply and communication cables.
To Next Page
