EasyManuals Logo

BMPRO J35 + ControlNode User Manual

BMPRO J35 + ControlNode
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
WARNING
Before using a battery other than that which was installed at the caravan dealership,
consult with the battery manufacturer for a detailed description of the installation,
uses and maintenance of the battery. Verify that the type and capacity of the battery
or batteries used are compatible for use with the J35.
WARNING
Do not install a battery in the same compartment where flammable material, such as
petrol, is stored.
DISCONNECTING A BATTERY FROM THE J35
To disconnect a battery from the J35:
1. Power o all loads connected to the J35, the easiest way is with the switch
connected to the J35 Load Isolation input.
2. Turn o and remove all power sources (mains/solar/AUX) to the J35.
3. Disconnect the batterys negative (black) terminal from the J35 Batt-
connection point.
4. Disconnect the batterys positive (red) terminal from the J35 Batt+
connection point.
After fitting a new battery to the J35, make sure that it is configured in the JHub
App.
Correctly configuring the battery capacity and profile will ensure that the J35
will
select the best charging parameters for the caravan battery in use, and the
software accurately estimates battery usage.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BMPRO J35 + ControlNode and is the answer not in the manual?

BMPRO J35 + ControlNode Specifications

General IconGeneral
BrandBMPRO
ModelJ35 + ControlNode
CategoryServer
LanguageEnglish

Related product manuals