Adjustments
50
4. Select "Key-dependent settings" and press
the controller.
The available functions are displayed:
> "POWER"
Programs of the M Engine Dynamics
Control, refer to page 56
> "EDC"
Programs of the Electronic Damper
Control EDC
*
, refer to page 78
5. Select the desired function.
6. Press the controller.
7. Turn the controller to select the desired set-
ting.
8. Press the controller.
The setting is stored for the remote control cur-
rently in use.
Online Edition for Part no. 01 41 0 014 699 - © 10/07 BMW AG
To Next Page
Loading...
