BMW 2013 S 1000R User Manual

Check level of brake fluid in
rear brake-fluid reservoir 1.
The brake fluid level in the
brake-fluid reservoir drops
due to brake pad wear.
Rear brake fluid level
Brake fluid, DOT4
The brake fluid level must
not fall below the MIN mark.
(Brake-fluid reservoir horizon-
tal)
If brake fluid level falls below the
approved level:
A low fluid level in the
brake reservoir can allow air
to penetrate the brake system.
This significantly reduces braking
efficiency.
Check brake fluid level
regularly.
Have the defect corrected as
soon as possible by an autho-
rized workshop, preferably an
authorized BMW Motorrad re-
tailer.
Coolant
Checking coolant level
Make sure ground is level and
firm and park motorcycle.
Read off coolant level on ex-
pansion tank 1. Direction of
9
125
z Maintenance

BMW 2013 S 1000R Specifications

General

Displacement	999 cc
Maximum Torque	112 Nm (83 lb-ft) at 9, 250 rpm
Engine Type	Liquid-cooled 4-stroke in-line four-cylinder engine
Maximum Power	118 kW (160 hp) at 11, 000 rpm
Transmission	6-speed
Frame	Aluminum bridge frame, engine self-supporting
Front Suspension	Upside-down telescopic fork, 46 mm diameter
Rear Suspension	Aluminum 2-sided swing arm
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 220 mm disc, single-piston caliper
ABS	Standard
Curb Weight	207 kg (456 lbs)
Fuel Capacity	17.5 l (4.6 US gal)