E85 Information/Communication
- 84 -
Snap-in adapter
Two snap-in adapters are currently available (described in the
following).
The snap-in adapter regulates battery charging in the Bluetooth
mobile phone and establishes the connection to the GSM
vehicle aerial.
The after-run time is set at the plant to 12 minutes. The after-run
time can be defined as required in the range between 0 to
60 minutes. The mobile phone functions are available during this
period of time and charging of the mobile phone battery is
ensured.
Fig. 57: Snap-in adapter
Index Designation
1 Charge contacts
2 Aerial connection
3 Eject button, Bluetooth mobile phone
KT-10790
To Next Page
Loading...
