BMW F31 User Manual

BMW 3-Serie Limousine F30 03/14 >>
BMW 3-Serie Touring F31 03/14 >>
BMW 3-Serie Gran Turismo F34 03/14 >>
750061
Installation instructions
Reference:
The following information must be reviewed before beginning the assembly:
The installation instructions are to be thoroughly read.
The installation should be carried out by qualified personnel with the relevant technical knowledge.
The vehicle manufacturers' current technical notices and information on retrofitting must be followed.
The removal and replacement instructions found in the current repair manuals must be followed.
It must be ensured that the vehicle is technically suitable for the installation of a trailer hitch.
For the fitment instructions for other
models covered by this part go to http://
www.erich-jaeger.co.nz/Solutions/
Solutions-BMW.html
or
Scan this QR code

BMW F31 Specifications

General

Brand	BMW
Model	F31
Category	Automobile
Language	English

Summary

Document Introduction and Reference

Pre-Assembly Reference Information

Crucial information to review before starting installation, including qualifications and technical notices.

Step 1: Vehicle Preparation

Keyless-Go and Proximity Check

Ensures the vehicle is in the correct state, considering keyless systems and proximity.

Battery Connection Safety

Step 2: Cable Routing

Routing Options A and B

Illustrates cable routing procedures for Option A and Option B.

Routing Options 1 and 2

Illustrates cable routing procedures for Option 1 and Option 2.

Step 4: F30 Drilling

F30 Hole Drilling Guide

Specifies dimensions and locations for drilling holes required for installation in the F30.

Step 6: F30 Module C Connection

Connecting F30 Module C

Instructions for connecting the module labeled C in the F30 vehicle.

Step 8: F30 Module E Connection

Connecting F30 Module E

Instructions for connecting the module labeled E in the F30 vehicle.

Step 9: F30 Module F Connection

Connecting F30 Module F

Step 11: F31 Drilling

F31 Hole Drilling Guide

Specifies dimensions and locations for drilling holes required for installation in the F31.

Step 12: F31 Cable Routing

F31 Routing Connections

Step 13: F31 Module C Connection

Connecting F31 Module C

Instructions for connecting the module labeled C in the F31 vehicle.

Step 14: F31 Module D Connection

Connecting F31 Module D

Step 15: F31 Module E Connection

Connecting F31 Module E

Instructions for connecting the module labeled E in the F31 vehicle.

Step 16: F31 Module F Connection

Connecting F31 Module F

Step 18: F34 Drilling

F34 Hole Drilling Guide

Specifies dimensions and locations for drilling holes required for installation in the F34.

Step 19: F34 Cable Routing

F34 Routing Connections

Step 20: F34 Module C Connection

Connecting F34 Module C

Instructions for connecting the module labeled C in the F34 vehicle.

Step 21: F34 Module D Connection

Connecting F34 Module D

Step 22: F34 Module E Connection

Connecting F34 Module E

Instructions for connecting the module labeled E in the F34 vehicle.

Step 23: F34 Module F Connection

Connecting F34 Module F

Step 24: CAN-Wire Connection

CAN-Wire Options A & B

Step 25: Option A Module H Connection

Connecting Option A Module H

Step 26: Option B Module H Connection

Connecting Option B Module H

Step 28: Fuse Box Configuration

F30 Fuse Box Options

F31 Fuse Box Options

F34 Fuse Box Options

Step 29: Option 1 Module G Connection

Connecting Option 1 Module G

Step 30: Option 1 Fuse Connection

Connecting Option 1 Fuse F113

Step 32: Option 2 Fuse Connection

Connecting Option 2 Fuse

Step 34: Module A Connection

Connecting Module A and Wires

Step 38: Optional Trailer Brake Prep

Trailer Brake Preparation Steps

Step 39: Battery Safety Precautions

Battery Connection Warning

Crucial safety warning regarding the correct procedure for battery connection.

Post-Installation Checks

Check All Lighting Functions

Verifies the correct operation of all vehicle lighting systems after installation.

Verify Bulb Out Detection System

Step 44: PDC Check

Park Distance Control (PDC) Check

Step 45: Coding and Initialization

Trailer Module Coding Procedure

Step-by-step instructions for coding and initializing the trailer module via ISTA/P.