BMW F34 User Manual

BMW 3-Serie Limousine F30 03/14 >>
BMW 3-Serie Touring F31 03/14 >>
BMW 3-Serie Gran Turismo F34 03/14 >>
750061
Installation instructions
Reference:
The following information must be reviewed before beginning the assembly:
The installation instructions are to be thoroughly read.
The installation should be carried out by qualified personnel with the relevant technical knowledge.
The vehicle manufacturers' current technical notices and information on retrofitting must be followed.
The removal and replacement instructions found in the current repair manuals must be followed.
It must be ensured that the vehicle is technically suitable for the installation of a trailer hitch.
For the fitment instructions for other
models covered by this part go to http://
www.erich-jaeger.co.nz/Solutions/
Solutions-BMW.html
or
Scan this QR code

BMW F34 Specifications

General

Brand	BMW
Model	F34
Category	Automobile
Language	English

Summary

BMW 3-Series Trailer Hitch Installation Guide

Model Identification and Prerequisites

Identifies BMW 3-Series models (F30, F31, F34) and outlines essential pre-installation information.

Step 1: Vehicle Preparation

Keyless Go and Battery Safety

Instructions for handling keyless-go systems and safely disconnecting the vehicle battery.

Step 2: Wire Routing Options

CAN-Wire and Module Routing

Details on routing CAN-wires and connecting modules for different options.

Step 3: F30 Interior Removal

F30 Rear Seat and Panel Removal

Procedure for removing rear seats and interior panels in the F30 model.

Step 4: F30 Drilling and Wiring

F30 Hole Drilling and Wire Passage

Instructions for drilling holes and guiding wires through the F30 chassis.

Step 6: F30 Module C and D Connections

Connecting Module C and D Wiring

Steps for connecting module C and wiring connector D for the F30.

Step 8 & 9: F30 Electrical Connections

F30 Module E and F Connections

Step 10: F31 Interior Removal

F31 Rear Seat and Panel Removal

Step 11: F31 Drilling and Wiring

F31 Hole Drilling and Wire Passage

Step 13 & 14: F31 Module C and D Connections

Connecting Module C and D Wiring (F31)

Step 15 & 16: F31 Module E and F Connections

F31 Module E and F Wiring

Step 17: F34 Interior Removal

F34 Rear Seat and Panel Removal

Step 18: F34 Drilling and Wiring

F34 Hole Drilling and Wire Passage

Step 20 & 21: F34 Module C and D Connections

Connecting Module C and D Wiring (F34)

Step 22 & 23: F34 Module E and F Connections

F34 Module E and F Wiring

Step 24: CAN-Wire Connection Options

Option A and B CAN-Wire Setup

Step 25: Detailed Option A CAN-Wire Connection

Option A CAN-Wire Connection Procedure

Step 26: Detailed Option B CAN-Wire Connection

Option B CAN-Wire Connection Procedure

Step 28: Fuse Box Options and Assignment

Fuse Assignment for Options 1 & 2

Step 29 & 30: Option 1 Fuse Box Connection

Connecting Module G (Option 1)

Step 31 & 32: Option 2 Fuse Box Connection

Connecting to Power and Fuse Assignment (Option 2)

Step 33 & 34: Rear Module A Wiring

Connecting Rear Module A and Wire Colors

Step 35-37: Trailer Hitch Wiring and Color Codes

Trailer Hitch Connection and Wire Key

Step 40-42: Functional Checks and Information

Lighting and Bulb Out Detection Testing

Procedures for testing all lighting functions and bulb out detection.

Step 44: PDC System Check

Parking Distance Control Configuration

Steps to check and configure the Parking Distance Control system.

Step 45: Vehicle Coding

ISTA/P Trailer Module Initialization

Detailed procedure for initializing the trailer module using ISTA/P software.