181
EntertainmentReference At a glanceControlsDriving tipsCommunications NavigationMobility
Inserting mobile phone
1. Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
2. With the buttons facing upward, press the
mobile phone toward the electrical connec-
tions and press down until it engages.
From radio readiness or with the steering
unlocked the mobile phone's battery is
charged.
To protect the vehicle's batteries, avoid
using the phone when the ignition is
switched off.<
Removing mobile phone
Press button.
Online Edition for Part no. 01 41 0 012 830 - © 08/06 BMW AG
To Next Page
Loading...
