Everything under control
70
1. Open the start menu.
2. Open "Navigation".
Without navigation system
*
:
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Trip computer" and press the con-
troller.
> Departure time
> Driving time
> Distance traveled
> Average speed
> Average fuel consumption
Switching trip computer on/off and resetting
all values:
1. Select "Set" and press the controller.
2. Select the desired menu item and press the
controller.
Display options
You can display the computer or the trip com-
puter in the assistance window.
1. Move the controller to the right to change to
the assistance window and press the con-
troller.
2. Select a menu item:
> "Onboard info"
> "Trip computer".
3. Press the controller.
Service requirements
The remaining driving distance and the date for
the next maintenance are displayed briefly with
the ignition switched on.
The first oil change displayed at approx.
1,200 miles/2,000 km signals that the break-in
check is due.
Your BMW Service Advisor can deter-
mine your vehicle's current service
requirements by reading out the data stored in
the remote control.<
Additional information
You can view more detailed information by
using the Control Display, for explanation of
principle, refer to page 16.
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Info sources" and press the control-
ler.
Online Edition for Part no. 01 41 0 012 830 - © 08/06 BMW AG
To Next Page
Loading...
Need help?
General
