Controls
69
Reference At a glanceDriving tipsCommunications NavigationEntertainmentMobility
50 km, otherwise engine functions are not
ensured and damage can occur.<
Average fuel consumption
The average fuel consumption is calculated for
the time during which the engine is running.
To reset the average fuel consumption: press
the BC button in the turn signal lever for approx.
2 seconds.
For different routes
You can display the average speed for two dif-
ferent routes on the Control Display, refer to the
following and to Trip computer.
Displays on Control Display
You can also call up the computer via iDrive, for
explanation of principle, refer to page 16.
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
Without navigation system
*
:
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination and
remaining distance:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
system
*
, refer to page 120.
> Cruising range
> Average speed
> Average fuel consumption
Periods with the vehicle parked and the engine
switched off are not included in the calculations
of average speed.
Resetting values
You can reset the values for average speed and
average fuel consumption:
1. Select the desired menu item and press the
controller.
2. Press the controller again to confirm.
Entering a distance manually
1. Select "Distance to dest." and press the
controller.
2. Turn the controller to select the distance
to your destination. If necessary, hold it
against a slight resistance to enter a greater
difference.
3. Press the controller to apply the setting.
The distance is automatically predetermined
during the destination guidance of the naviga-
tion system
*
.
Trip computer
The trip computer is suitable for a vacation trip,
for example.
Online Edition for Part no. 01 41 0 012 830 - © 08/06 BMW AG
To Next Page
Loading...
