BMW R 1200 S User Manual

Clock
Setting clock
Attempting to set the clock
while riding the motorcycle
can lead to accidents.
Set the clock only when the mo-
torcycle is stationary.
Switch on the ignition.
Repeatedly press button 1 until
the odometer reading appears
on the display.
Alternatively, repeatedly press
button 2 until the total distance
covered reading appears on
the display.
with OE On-board computer
or with OE Tyre-pressure
monitoring (RDC):
Repeatedly press button 2 until
the clock appears on the dis-
play.
In this case, the button in
the instrument cluster oper-
ates only the tripmeters.
4
42
z Operation

BMW R 1200 S Specifications

General

Displacement	1170 cc
Bore x Stroke	101 mm x 73 mm
Max Torque	112 Nm (83 lb-ft) at 6, 800 rpm
Final Drive	Shaft drive
Front Suspension	BMW Motorrad Telelever
Rear Suspension	BMW Motorrad Paralever
Seat Height	830 mm
Engine Type	Air/oil-cooled flat twin (boxer), four-stroke
Max Power	122 hp at 8, 250 rpm
Transmission	6-speed
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single 265 mm disc, 2-piston caliper
Fuel Capacity	17 liters
Frame	Three-section frame consisting of front and rear sections, load-bearing engine