Warning
Objects on the head restraint reduce the pro-
tective effect in the head and neck area.
There is a risk of injury.
▷ Do not use seat or head restraint covers.
▷ Do not hang objects, for instance clothes
hangers, directly on the head restraint.
▷ Only use accessories that have been de-
termined to be safe for attachment to a
head restraint.
▷ Do not use any accessories, for instance
pillows, while driving.
Adjusting the height
▷ Downward: Press the lock button on the
backrest, arrow 1, and push the head re-
straint downward.
▷ To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Adjusting the distance
The distance to the back of the head is ad-
justed via the backrest inclination.
Adjust the distance so that the head restraint
is as close as possible to the back of the head.
Removing the head restraints
Only remove the head restraint if no one will be
sitting in the seat in question.
1.
Raise the head restraint up against the re-
sistance.
2. Press the lock buttons on the backrest, ar-
row 1, and pull the head restraint out com-
pletely.
Installing head restraints
Proceed in the reverse order to install the head
restraint.
Rear head restraints
Safety information
Warning
Removal or incorrect adjustment of head re-
straints can cause injuries in the head and
neck area. There is a risk of injury.
▷
Before driving, install the removed head
restraints on the occupied seats.
▷ Adjust the head restraint so its center
supports the back of the head at as
close to eye level as possible.
▷ Adjust the distance so that the head re-
straint is as close as possible to the back
of the head. Adjust the distance via the
backrest tilt as needed.
Seite 103
Seats, mirrors and steering wheel
CONTROLS
103
Online Edition for Part no. 01405A8A536 - VI/23
To Next Page
Loading...
