EasyManua.ls Logo

BMW X1 - Driving

BMW X1
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Driving
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Start/Stop button
Principle
Pressing the Start/Stop button on the center
console switches drive-ready state on or off.
General information
Drive-ready state is switched on when you de-
press the brake pedal while pressing the Start/
Stop button.
Pressing the Start/Stop button again switches
the drive-ready state back off and standby
state is switched back on.
Additional information:
Drive-ready state, refer to page 41.
Standby state, refer to page 40.
Driving off
1.
Turn on drive-ready state.
2. Apply gear position.
3. Driving off.
When stopping
Selector lever position D, S, L, or R
On inclines, the system prevents rolling back
against the set driving direction and provides
drive-off support.
Driving off
Press the accelerator pedal to drive off.
The parking brake is released automatically.
Depending on the load and driving situation or
when a trailer is used, the vehicle may roll back
slightly.
Auto Start/Stop function
Principle
The Auto Start/Stop function helps save fuel.
The system switches off the engine during a
stop, for instance in traffic jam or at traffic
lights. Drive-ready state remains switched on.
The engine starts automatically for driving off.
General information
After each engine start using the Start/Stop
button, the Auto Start/Stop function is ready.
The function is activated at low speeds.
Engine stop
Functional requirements
The engine is switched off automatically when
stopping under the following conditions:
The selector lever is in selector lever posi-
tion D.
Without mild hybrid technology:
The brake pedal remains depressed while
the vehicle is at a standstill or the vehicle is
held by Automatic Hold.
The driver's seat belt is buckled or the driv-
er's door is closed.
Seite 115
Driving
CONTROLS
115
Online Edition for Part no. 01405A8A536 - VI/23

Other manuals for BMW X1

Related product manuals