In some situations, the idle state is not set au-
tomatically, for instance during a phone call or
when the low beams are switched on.
Establishing idle state when
opening the front doors
After a trip, the sleep mode can be established
by opening the front doors. For this purpose,
all passengers must exit the vehicle.
To activate or deactivate this function,
go through the menu as follows via
iDrive: Apps menu / "Vehicle" / "Doors and
windows" / "LOCK/UNLOCK" / "Turn off after
opening door"
Establishing the sleep mode
manually
To establish idle state in the vehicle after com-
pletion of trip:
Press and hold the knurled
wheel on the center console un-
til the OFF indicator on the in-
strument cluster goes out.
Deep sleep mode
Principle
Deep sleep mode is activated to prevent the
vehicle battery from discharging when the ve-
hicle is stationary for several weeks.
In deep sleep mode, the vehicle functions are
limited to the essentials.
Activating deep sleep mode
1.
Go through the menu as follows via iDrive:
Apps menu / "Vehicle" / "System settings" /
"Deep sleep mode"
2. Select the desired setting.
To access the vehicle while it is in deep sleep
mode, press the Open button in the cargo
area.
Deactivating deep sleep mode
▷ Turn off the function on the control display.
▷ Driving with the vehicle.
Standby state
Principle
When standby state is switched on, most func-
tions can be used while the vehicle is station-
ary. Desired settings can be adjusted.
General information
The vehicle is in the standby state after the
front doors are opened from the outside.
Manually setting to standby
General information
Standby can be switched back on after the ve-
hicle is automatically set to idle state.
Via thumbwheel
Press the knurled wheel on the
center console. The control dis-
play and the instrument cluster
illuminate.
Seite 40
CONTROLS
Operating condition of the vehicle
40
Online Edition for Part no. 01405A8A536 - VI/23
To Next Page
Loading...
