Replacing components
Vehicle features and options
This chapter describes model-specific equip-
ment, systems, and functions that are currently
available, or may become available in the fu-
ture, even if they are not present in the vehicle.
Additional information:
Vehicle equipment, refer to page 8.
Onboard vehicle tool kit
The onboard vehicle tool kit is located under
the cargo area floor.
Wiper blades
Safety information
NOTICE
The window may sustain damage if the wiper
falls onto it without the wiper blade installed.
There is a risk of damage to property. Hold
the wiper firmly when changing the wiper
blade. Do not fold in or switch on the wiper
without a wiper blade installed.
NOTICE
Folded-out wipers can be jammed when the
hood is opened. There is a risk of damage to
property. Make sure that the wipers with the
wiper blades mounted are folded down onto
the windshield before opening the hood.
Replacing the front wiper blades
To replace the front wiper blades, proceed as
follows:
1.
Move the wipers to the fold-out position.
2. Lift the wipers off the windshield and hold.
3. Press the button on the wiper, arrow 1, turn
the wiper blade clockwise slightly, then pull
it forward and out, arrow 2.
4. Insert the new wiper blade by pressing it on
until you hear it snap into the holder.
5. Fold in the wipers.
Additional information:
Seite 353
Replacing components
MOBILITY
353
Online Edition for Part no. 01405A8A536 - VI/23
To Next Page
Loading...
