EasyManua.ls Logo

BMW X1 - Page 41

BMW X1
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Via start/stop button
Press the Start/Stop button on
the center console. The control
display and the instrument clus-
ter illuminate.
Display in the instrument cluster
OFF is displayed in the instru-
ment cluster. The drivetrain is
switched off and standby state
switched on.
Drive-ready state
Principle
Turning on drive-ready state corresponds to
starting the engine.
General information
Some vehicle functions can only be used with
the drive-ready state switched on.
Safety information
DANGER
If the exhaust pipe is blocked or ventilation is
insufficient, harmful exhaust gases can pene-
trate the vehicle. The exhaust gases contain
pollutants which are colorless and odorless.
In enclosed areas, exhaust gases can also
accumulate outside of the vehicle. There is a
danger to life. Keep the exhaust pipe free and
ensure sufficient ventilation.
Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before leaving the vehicle, secure the vehicle
against rolling away.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
Set the parking brake.
On uphill grades or on downhill slopes,
turn the front wheels in the direction of
the curb.
On uphill grades or on downhill slopes,
also secure the vehicle, for instance with
a wheel chock.
NOTICE
Repeated attempts to start the engine or re-
peated starting of the vehicle in rapid suc-
cession can cause the starter to overheat.
This also results in unburned or inadequately
burned fuel, and can cause the catalytic con-
verter to overheat. There is a risk of damage
to property. Avoid repeated starting of the
vehicle, particularly repeated starting in rapid
succession.
Turning on the drive-ready state
General information
Drive-ready state is turned on or
off with the Start/Stop button on
the center console.
Turning on the drive-ready state
1.
Depress the brake pedal.
2. Press the Start/Stop button on the center
console.
Seite 41
Operating condition of the vehicle
CONTROLS
41
Online Edition for Part no. 01405A8A536 - VI/23

Other manuals for BMW X1

Related product manuals