The ignition is activated automatically for a
brief time and is stopped as soon as the en-
gine starts.
Most of the indicator/warning lights in the in-
strument cluster illuminate for a varied length
of time.
Gasoline engine
Depending on the motorization, the full drive
power may not be available for approximately
30 seconds after starting the engine. In this
case, the vehicle will not accelerate as usual.
Additional information:
Power gauge, refer to page 139.
Display in the instrument cluster
The activated drive-ready state is indicated
in the instrument cluster, depending on the
equipment, by the display of information re-
quired for driving or the READY display.
Turning off drive-ready state
1.
When the vehicle is stationary, apply the
parking brake.
2. Press the Start/Stop button on the center
console.
The engine is switched off. The vehicle
switches into standby state.
Seite 42
CONTROLS
Operating condition of the vehicle
42
Online Edition for Part no. 01405A8A536 - VI/23
To Next Page
Loading...
