Display in the instrument cluster
If there is a risk of collision with a detected
vehicle, a warning light is displayed.
Icon Meaning
Oncoming traffic warning when a ve-
hicle is detected.
General risk of collision.
Warning function
The warning function for turning with oncom-
ing traffic issues warnings on different levels,
depending on the respective hazard. This sys-
tem prompts the driver to intervene manually.
Additional information:
Forward Collision Mitigation, refer to page 167.
System limits
General information
Follow the system limits in the "Forward Colli-
sion Mitigation" chapter.
Detection range
With the warning function for turning with on-
coming traffic, the following may not be de-
tected or may be detected only with a delay in
the detection range of the sensors, e.g.:
▷
Oncoming vehicles at a very high speed.
▷ Vehicles that are hidden by other vehicles.
▷ Vehicles with an unusual front view.
Warning function for
pedestrians
Principle
The Pedestrian Warning system warns you of
a possible risk of collision with pedestrians and
cyclists by displaying a warning light on the
instrument cluster. This system also brakes
automatically when necessary. You can cancel
automatic brake intervention manually, e.g., by
actively moving the steering wheel.
The system issues warnings for speeds that
are common in towns and cities.
In the event of an accident, the system helps
by reducing impact speed.
The sensors detect the traffic situation in their
detection range on a straight road.
In addition, the sensors detect the traffic situa-
tion in their detection range when turning.
Safety information
Follow the safety information in Chapter “For-
ward Collision Mitigation”.
Speed range
The Pedestrian Warning function is activated
when your vehicle speed is greater than ap-
prox. 3 mph/5 km/h.
Seite 173
Safety
CONTROLS
173
Online Edition for Part no. 01405A8A536 - VI/23
To Next Page
Loading...
