▷ Raise the temperature.
▷ Lower temperature.
Air flow
Principle
The air flow generated by the blower can be
adjusted as needed.
Adjusting the air flow
The air flow can be set via iDrive.
1.
Tap the icon for the Climate menu
on the menu bar.
2. Select the desired setting.
Automatic program:
▷ Tap the large air flow icon to
increase the air flow.
▷ Tap the small air flow icon to
reduce the air flow.
Manual mode:
▷ Tap the up arrow: increase the air flow.
▷ Tap the down arrow: reduce the air flow.
The air flow may be reduced to preserve the
vehicle battery.
Air distribution settings
Principle
The air distribution can be adjusted as re-
quired in manual mode.
Adjusting the air distribution
The air distribution can be set via iDrive:
1. Tap the icon for the Climate menu
on the menu bar.
2. Select the desired setting:
▷ Aim the air flow downward, arrow 1.
▷ Aim the air flow upward, arrow 2.
▷ Aim the air flow at the windshield , ar-
row 3.
The selected air distribution is displayed.
Air conditioning
Principle
With the climate control function, the air inside
the vehicle is cooled and dehumidified, then
warmed again depending on the temperature
settings.
Functional requirement
Standby or drive-ready state is switched on.
Seite 263
Climate control
CONTROLS
263
Online Edition for Part no. 01405A8A536 - VI/23
To Next Page
Loading...
