BMW X1 - Page 267

Ventilation
Principle
The ventilation system offers individual ranges
of adjustment for direct or indirect ventilation
to optimize the air flows in the vehicle.
General information
Open the air vents and position them to ensure
effective climate control.
The air flow heats or cools noticeably, depend-
ing on the set desired temperature.
Front ventilation
▷ Lever for changing the airflow direction, ar-
row 1.
▷ Thumbwheel for variable adjustment of the
air flow at the vents, arrow 2.
Ventilation in the rear
▷ Lever for changing the airflow direction, ar-
row 1.
▷ Thumbwheel for variable opening and clos-
ing of the air vents, arrow 2.
Setting the ventilation
Depending on the desired ventilation, align the
air flow directly or indirectly toward the pas-
sengers.
Air quality
General information
The air quality in the interior is improved by the
following components:
▷
Emission tested passenger compartment.
▷ Interior filter.
▷ Air conditioning system to control the
temperature, air flow and recirculated-air
mode.
▷ Pre-ventilation.
Interior filter
The interior filter cleans the incoming fresh
air or the circulated interior air in recirculation
mode.
Depending on the equipment:
▷
Dust and pollen is filtered out from the in-
flowing air.
▷ Nano-particle emissions are reduced.
Seite 267
Climate control
CONTROLS
267
Online Edition for Part no. 01405A8A536 - VI/23