Setting the departure time
The departure time can be set via iDrive:
1. Tap the icon for the Climate menu
on the menu bar.
2. Tap the settings button.
3. "Pre-ventilation"
4. "Departure plan"
5. Select the desired departure time.
6. Set the desired departure time.
7. Select day of the week, if needed.
Activating the departure time
The departure time can be activated via iDrive:
1.
Tap the icon for the Climate menu
on the menu bar.
2. Tap the settings button.
3. "Pre-ventilation"
4. "Departure plan"
5. Activate the desired departure time.
Activating with My BMW App
Depending on vehicle equipment, the My BMW
App with remote functionality can be used to
turn on pre-cooling at a preset departure time
or immediately.
Pre-conditioning through
Remote Engine Start
Principle
Pre-conditioning cools or heats the car's inte-
rior prior to start of the trip to a comfortable
temperature. The system automatically cools,
vents, and heats depending on the interior, ex-
ternal, and set temperature. Snow and ice may
be removed more easily.
The system starts the engine automatically
and allows it to run for a limited period of time.
Safety information
DANGER
If the exhaust pipe is blocked or ventilation
is insufficient, harmful exhaust gases can pol-
lute the area in and around the vehicle or
penetrate the vehicle. The exhaust gases
contain pollutants which are colorless and
odorless. In enclosed areas or areas with in-
sufficient ventilation, exhaust gases can also
accumulate outside of the vehicle. There is a
danger to life. Keep the exhaust pipe free and
ensure sufficient ventilation. Do not switch on
stationary climate control in enclosed areas
or areas with insufficient ventilation, e.g. in
enclosed garages.
Warning
When stationary climate control is in opera-
tion, high temperatures can occur underneath
the body, for instance caused by the exhaust
system. If combustible materials such as
leaves or grass come in contact with hot
parts of the exhaust system, these materi-
als can ignite. There is a risk of fire. Make
sure that no combustible materials can come
in contact with hot vehicle parts during sta-
tionary climate control operation, e.g. leaves,
grass, gas, gasoline, oil or other combustible
objects.
Functional requirements
▷
The vehicle is in idle state or standby state.
▷ Battery is sufficiently charged.
▷ The fuel tank capacity is sufficient.
▷ Hood is closed.
Seite 269
Climate control
CONTROLS
269
Online Edition for Part no. 01405A8A536 - VI/23
To Next Page
