EasyManua.ls Logo

BMW X1 - Page 304

BMW X1
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If reverse is engaged again after a short
distance, the function is active again.
During activation or intervention by driver
assistance systems.
When the view on the control display is
overlaid with messages.
In case of a slippery surface.
When the vehicle is rolling such as on a
slope.
In case of changed ambient conditions.
If the vehicle speed exceeds approx.
6 mph/10 km/h.
Turning trailer protection brake
on/off
The trailer brake intervention system helps
prevent the vehicle-trailer combination from
rolling away in an uncontrolled way. Whenever
the Trailer Assistant is canceled, the trailer
protection brake is applied and the vehicle is
secured at a standstill. The trailer protection
brake can be switched on or off.
Go through the menu as follows via iDrive:
Apps menu / "Vehicle" / "Driving settings" /
"Driver Assistance" / "Parking" / "Trailer
protection braking".
System limits
Speed threshold
The maximum speed is limited to approx.
6 mph/10 km/h.
If the maximum speed is exceeded, the func-
tion is interrupted.
A warning is given at a speed of approx.
4 mph/7 km/h.
Functional limitations
Trailers with fifthwheel steering are not sup-
ported.
When maneuvering, the following can restrict
the Trailer Assistant or cause a collision:
Accessories on tow bar, e.g., a rear bicycle
rack.
Tow bars and trailers with unusual shapes.
Unsuitable removable trailer hitches.
Rearview camera is dirty or covered.
Additional information:
Cameras, refer to page 34.
Trailer stabilization control
Principle
Trailer stabilization control helps by absorbing
the swinging movements of the trailer.
The system detects swinging and automati-
cally brakes the vehicle quickly in order to
leave the critical speed range and stabilize the
trailer.
General information
If the trailer power socket is occupied but a
trailer has not been hitched, the system can
also become active in extreme driving situa-
tions, e.g., when using a bicycle rack with light-
ing.
Functional requirement
The following functional requirements apply for
trailer stabilization control:
A trailer is attached.
The trailer power socket is occupied.
Vehicle speed must be more than approx.
40 mph/65 km/h.
System limits
The system cannot intervene or not intervene
in time in the following situations, for instance:
If a trailer jackknifes suddenly, for instance
on slippery roads or loose surfaces.
If a trailer with a high center of gravity tilts,
before swinging is detected.
Seite 304
DRIVING TIPS
Trailer and rear carrier
304
Online Edition for Part no. 01405A8A536 - VI/23

Other manuals for BMW X1

Related product manuals