BMW X1 - Page 64

Selecting/changing a driver profile
If the BMW ID could not be recognized when
unlocking the vehicle, select the BMW ID on
the welcome window.
The driver profile can be changed at any time
via iDrive:
1. Tap the BMW ID icon or the personal
profile image on the status bar.
2. "Change profile"
3. Select the BMW ID or driver profile.
4. If necessary, enter the PIN.
The BMW ID is activated and associated set-
tings are loaded.
Deleting a BMW ID
1.
Tap the BMW ID icon or the personal
profile image on the status bar.
2. "Settings"
3. "Manage profiles"
4. Tap the icon for deleting the desired
BMW ID.
When deleting BMW IDs, note the following:
▷
Removing a BMW ID from the vehicle
causes the vehicle to be removed from
the My BMW App. If the BMW ID has
been synchronized with the BMW Cloud,
the data stored in the BMW Cloud is re-
tained after the BMW ID is deleted. If the
currently active BMW ID is removed, a dif-
ferent BMW ID must be selected.
▷ Deleting the primary user's BMW ID resets
the vehicle to factory settings. The vehicle
is removed from the My BMW App of all
users, and all BMW IDs are removed from
the vehicle.
▷ Removing a vehicle from the My BMW App
removes the corresponding BMW ID from
the vehicle. If the BMW ID was synchron-
ized with the BMW Cloud, the BMW ID data
stored in the BMW Cloud will be retained.
▷ If the vehicle is removed from the primary
user’s My BMW App, it will also be removed
from the My BMW Apps of all users. The
corresponding BMW IDs are removed from
the vehicle.
Settings
The settings applied when adding a BMW ID
can be changed.
1. Tap the BMW ID icon or the personal
profile image on the status bar.
2. "Settings"
The following settings are available:
▷ "Driver recognition"
Configuring or adjusting driver detection.
▷ "Lock screen"
Create PIN protection.
▷ "My BMW ID"
Switches synchronization with the BMW
Cloud on/off.
Set the profile image if it has not been
transferred from the My BMW App.
▷ "Manage profiles"
Managing BMW IDs, e.g., adding or remov-
ing a BMW ID.
Configuring PIN protection
Every vehicle user can select any of stored
BMW IDs. If you want to prevent the settings
from being changed or the data from being
viewed for a BMW ID, you can configure PIN
protection.
1.
Tap the BMW ID icon or the personal
profile image on the status bar.
2. Select the desired BMW ID.
3. "Settings"
4. "Lock screen"
5. Enter the desired PIN.
Seite 64
CONTROLS
Personal settings
64
Online Edition for Part no. 01405A8A536 - VI/23